Firearms Research Lab.
This was the department with the most cutting-edge technical talents in the entire Far East International Arms Manufacturing Group.
Prior to this, the members of this department had been working on the development of ultra-high-performance anti-material sniper rifles.
It was the current Destroyer.
With the success of the Saboteurs, they had a short break.
And now, Fang Ning's appearance had reduced their short break even further.
"Everyone, there is a gun that needs to have two modes. One is single-shot, and the other is multi-shot.”
"In the continuous firing state, all 30 bullets will be fired within one second.”
"Not only that, but it also needs to be very light. The weight of the gun and the magazine needs to be controlled at about 1 kg.”
"The most important thing is that it needs to have the ability to shoot the enemy without leaving the cover.”
As they listened to Fang Ning list the gun's attributes one by one, the dozens of technicians present looked at each other.
"Boss, do you mean that we should use this as a criterion to design guns that meet all these requirements?”
"That's right, you got it right."
"No, Boss, you might as well kill me. It's almost impossible to make all the functions and attributes match.”
"Yes, the first, second, and third attributes are not a problem if they are completed individually. However, it is simply impossible for a gun to have four attributes at the same time.”
"Boss, are you planning to make us turn the corner?”
Looking at the requirements on the wall, Cruise aimed at the fourth one.
Many guns in the firearms market met the first three criteria.
Although it was not possible to combine all three attributes into one gun, it was not difficult to develop it. It was just a matter of time.
However, the most difficult one should be the fourth one.
According to Cruise's memory, the earliest design of the curved gun was born during World War II.
Moreover, the curved gun at that time was actually very simple.
It was a very simple and crude way to bend the barrel.
For example, there were 45 degrees, 90 degrees, and 120 degrees.
The most ridiculous thing was that there were guns with barrels that were bent 180 degrees.
However, although the curved gun at that time was indeed effective.
However, there were two fatal flaws that could not be ignored.
First, the range of the curved gun would be greatly reduced. The effective damage range would be shorter as the angle of the curved gun increased.
For example, if the gun was bent 45 degrees, the original attack range of 300 meters would be reduced to about 200 meters.
When it was bent to 90 degrees, the attack range would be reduced to about 100 meters.
When it was bent to 180 degrees, the attack range was only a few dozen meters.
Of course, this was only a matter of attack range.
Most importantly, because the barrel was bent, the bullets would collide randomly in the barrel when the shooter pulled the trigger.
As the number of collisions increased, the damage of the gun barrel became more and more serious.
After firing 200 to 300 times, the barrel would be in danger of exploding.
Therefore, although there were already curved guns in World War II.
However, due to the high damage rate and the risk of fatal explosion, it was not fully popularized.
Now, the boss was looking at the curved gun. It was obvious that he was a little irrational.
According to Cruise's understanding, the United States and Israel were also developing it.
With the status of these two countries in the arms market, they had been researching for decades, not to mention this small private military enterprise.
Looking at the dozens of technicians who had no motivation, Fang Ning took out a document from the folder.
"This document contains some of my thoughts on the design of the bending device.”
"If you tell me that it's impossible to develop a curve gun after reading it, I'll never mention the development of a curve gun in the future.”
Upon hearing this, the technician walked up and picked up Fang Ning's information to read.
Since the boss had said so, then even if they were pretending, they had to finish reading the information, right?
However, when they picked up the information, they could no longer remain calm.
This was because they realized that their boss's idea was completely different from the design during World War II.
During World War II, the curved gun aimed at the barrel.
They had thought that their boss would be the same, but he would focus on improving the gun barrel and making it more durable.
However, that was not the case.
According to Fang Ning's information, the curve gun weapon system was made up of two parts.
The front part was a gun and a color camera, while the back part was a stock.
When it was used, the camera would record all the scenes as the gun bent.
The user did not need to stick his body out, but he could still see all the scenes through the display.
However, the problem now was how to integrate the weapon system and the camera system.
Moreover, they had to make the guns small enough.
In this way, even if there was a color camera installed on the gun, it would not affect its use due to the increase in weight.
Seeing this, the technicians changed their attitude and requested to immediately start developing the curve gun.
Because they knew very well.
Such a design concept and idea would bring a huge sensational effect to the entire firearms industry.
Perhaps in the near future.
Hiding behind a wall and shooting an enemy with a single shot would not be a dream.
At the same time, the Far East International Arms Manufacturing Group would also become famous overseas because of this high-tech gun.
Therefore, they were eager to get into research and development.
To them, this was both a challenge and an opportunity.
(Although I still need more than 700 flowers to reach 3,500, there are still seven hours left until the end of today. Yes, I'll send it up first. I believe in my readers. I'll send it up first. The rest is up to you!)!!!）
This book comes from：m.funovel.com。