Since the beginning of the 21st century, industrial robots had been widely used in more and more fields. At present, robots were gradually replacing manual work and becoming the mainstream of the manufacturing industry.
" Meaning: In the previous die-casting production process, the melting and heat preservation of the die-casting alloy, the pre-heating of the die-casting mold, the spraying of the coating, the work and cleaning of the die-casting machine and the die-casting parts all had a large amount of smoke, radiation, and harmful gases. These impurities caused great harm to the health of the workers in the production line. In addition, there were some problems such as the low efficiency of manual pickup and the high labor cost.
Therefore, in order to improve production efficiency and security, as well as reduce the work intensity of workers, the use of die-casting robots to replace manual labor had important application value.
Looking at these two simple lines of words, Liu Yun was also helpless.
"The system is worried about the host's intelligence. If you can't even solve such a simple die casting robot simulation, even a three-year-old child will be able to solve this problem in a hundred years.”the system teased.
"System, I'm your host now. Can you not be so sarcastic?”Liu Yun was speechless.
"The host is weak."
Liu Yun: " You're the boss. You're awesome. What can you do?" Do you think it's possible for my intelligence to increase to 100?”
"The host is quite self-aware. The system won't give it away for free.”the system mocked.
"There's no other way. Shut up. You're the only one who talks too much.”Liu Yun said.
"Bite me if you dare."
Liu Yun was speechless.
Liu Yun ignored it and looked at the design manuscript to see if she had any inspiration to write a part of it.
Starting from the confirmation of the design plan, this was considered the most basic. Even if he did not design a virtual simulation, he could still write it based on the necessary elements of the robot. It was just that in the past, his mind was muddled and he could not understand it. Now that he had added 5 Intelligence points, he could understand it immediately. Then, he began.
The first point was the design requirements. What did a robot have to design to pick up parts?
First of all, he had to design the jigs and material tables, and then make the workstation for the die casting robot in the automatic production line.
RobostStudio software was used to realize the transportation and die casting of the production line. It could also be programmed using the teaching device to simulate the animation effect of the transportation line.
Using the Solid Works drawing software, the material table and the work piece were designed. Then, the robot studio software was used to import the designed material table and the material table into the workstation, and then the mechanical device of the clamp was created.
Then, according to the production requirements, a workstation was built and programmed with a teaching device to reflect the simulation effect of the die casting production line.
The last step was to determine the plan. First of all, the smart components of the assembly line and the Smart components of the clamp had to be created and associated with the robot. They had to be called out in the program.
The second step was to set up the corresponding I/O signals.
The third step was to use the Smart component to allow the material to be replicated indefinitely on the assembly line.
In the fourth step, when the material comes out of the assembly line and reaches the corresponding position, it will be sensed by the sensor and fed back to the robot. Then, the robot will call the grabbing program to make the corresponding action.
The fifth step was to start the die-casting process after the grabbing was completed.
The sixth step was to repeat the process.
Liu Yun nodded in satisfaction. The trajectory of the entire die-casting robot was like this. However, most robots said that they would move along this trajectory.
Looking at the design principle of the next die-casting robot, Liu Yun was stumped. What was the design principle of the die-casting robot? Was it to complete the die-casting of a part, the robot to complete the work of picking up the part, and then follow the assembly line to the next step? That seemed to be the case.
Yes, that's right. Think about it first. First, after the robot is activated, the die casting door of the die casting machine will be closed, and then the die casting will be formed. After it is completed, the die casting door will be opened, and the robot will pick up the part...
"Host, I'm sorry to interrupt. I'm worried about your whimsical ideas. This is clearly a robot's operating method. What does it have to do with the design principle?”the system complained.
Liu Yun was speechless.
"Sigh, who asked you to be the host? This system will help you unconditionally once. It's a loss for this system to have a host like you.”
Liu Yun was speechless. If it wasn't for the fact that I couldn't do anything to you, I would have torn you apart if you were to complain like this.
"Listen well, this system will only say it once.”
"Die casting is a method of filling molten metal into the mold cavity at high speed under high pressure and solidifying the metal under this pressure to form a casting. High pressure and high speed are the fundamental differences between die casting and other casting methods.”
Liu Yun: " Understood. You're the boss. I admit defeat. Shut up. I'm not doing it today."”After typing in the content that he remembered, he turned off the computer. He couldn't do it anymore. His intelligence was limited.
It was already past three o'clock by the time he finished doing all this. He had already woken up and was lying down to play with his phone.
"Host, are you preparing to transmigrate for the first time?”the system asked.
"Then wear it. I'm bored now anyway.”Liu Yun said.
"Host, please be prepared."
"Wait, system, this time travel…”He was afraid that it would be difficult to explain if he suddenly disappeared.
"A year in this world is an hour in reality. Does the host understand now?”
Liu Yun: " Understood, understood. Wait for me for a while."”After saying that, Liu Yun took a tissue from the drawer and returned to the bathroom. The older one was still holding his phone after half an hour or an hour.
Nowadays, it was said that the most ruthless thing to do to oneself was to go to the toilet without a phone. It was common for one to go for half an hour or even an hour.
"Alright, System, let's begin."
Then, there was a flash of white light. The scene in front of him kept changing. He knew that the experience had begun.
This book comes from：m.funovel.com。