The next morning, Wang Yue woke up early and made a bowl of noodles.
Today, he was officially going to work at the steel rolling mill.
A fitter was a physically demanding job, so the small parts were fine.
If he encountered a large object that weighed hundreds of kilograms, he would be very tired after a day.
After eating, he walked towards the rolling mill with the workers who were heading to the rolling mill one after another.
Red Star Rolling Mill was the largest steel company in the capital.
The rolling mill was the main factory, and there were seven or eight branches below it.
The rolling mill was also very large.
It covered an area of more than four square kilometers.
There were more than 12,000 workers in the factory.
There were more than 70 workshops.
"Mr. Liu, have a smoke." As soon as he entered the workshop, he saw the foreman, Liu Changsheng, who was cleaning the machines.
When he came yesterday, the HR department assigned Wang Yue to be an apprentice under Liu Changsheng.
Liu Changsheng was Wang Yue's master.
Liu Changsheng was the foreman of the second bench work workshop, a level six bench worker.
Although he wasn't as good as Yi Zhonghai, who was a level eight fitter, he was still a bit weak.
However, it was already considered pretty good in the workshop.
There were only a few people in the second workshop now.
Wang Yue and Liu Changsheng arrived earlier.
Wang Yue came early to learn skills, while Liu Changsheng came early to take care of his disciples.
After all, everyone had their own processing tasks after 9 pm.
How would he have the time to teach his disciples?
Therefore, Wang Yue and Liu Changsheng came earlier.
Liu Changsheng was very serious about teaching his disciples.
There was a master and disciple allowance in the factory. During the period before graduation, the master would receive a monthly allowance of one yuan.
However, this subsidy was only for half a year. In half a year, the apprentices would basically finish their apprenticeship.
When they graduated, the disciple had to give the master a graduation gift. Usually, it was only three to five yuan.
However, at this time, three to five yuan was not a small number.
"Little Wang, I remember that Yi Zhonghai is from your compound. Why didn't you go to Workshop 7 to be an apprentice?”Liu Changsheng took the cigarette, took a puff, and asked curiously.
"I don't want to go. There's no reason." Wang Yue shook his head.
Wang Yue had watched TV dramas before, so he knew what kind of person Yi Zhonghai was.
With Yi Zhonghai suppressing them, it would be difficult for them to stand out.
Moreover, Yi Zhonghai might not have the patience to teach like Liu Changsheng.
Also, Liu Changsheng and Wang Feng had a good relationship.
"This month, our production task is to pull the wire in the pipe.”As he spoke, Liu Changsheng handed over a steel pipe.
Wang Yue looked at the steel pipe.
"Is this the production of gun barrels?" Wang Yue asked curiously.
This was because the front part of the steel pipe had rifling, and only the end of the pipe was eight or nine centimeters away from the rifling.
"This is a gun barrel?" Liu Changsheng asked in a low voice.
"That's right. This is the muzzle, and this is where the bullets are fired. The threads here are connected to the gun body.”Wang Yue introduced in a low voice.
Liu Changsheng frowned after listening.
"Xiao Wang, you know about this, and I know about it. Don't tell anyone else.”Liu Changsheng suddenly looked at Wang Yue seriously and said.
When Liu Changsheng received the production task, he asked the production director.
The production director didn't know who had placed the order.
Therefore, Liu Changsheng estimated that it should be the secret unit.
"I understand." Wang Yue nodded.
"I'll teach you how to make this artifact today.”Liu Changsheng took an iron rod and directly drilled a hole on the drilling machine.
Then, he changed the drill bit of the drilling machine, fixed the steel pipe on the machine, and adjusted it for a while.
"The next step is to pull the thread. Your hand must be steady here, and the speed of the handle must be uniform. Otherwise, the rifling will be damaged.”As he spoke, he started operating.
Wang Yue's horizons were greatly broadened.
This type of hand-operated drilling machine could actually be controlled so stably.
The speed of the rifling knife at the front was constant, and then the steel pipe was shaken to pull the string.
If it was slow, the curvature of the rifling would be too large. If it was fast, the curvature of the rifling would not be enough.
The speed was sometimes fast and sometimes slow, and it would become chaotic inside.
Rifling was a technical job.
"Alright, remember everything. For the useless parts over there, make the caliber a little bigger and practice rifling. If there's anything you don't understand, ask me.”
Liu Changsheng told Wang Yue everything he needed to pay attention to when pulling the rifling.
When Wang Yue started practicing.
It was almost nine o'clock in the morning, and the workers arrived one after another.
Instantly, the machines in the workshop roared. Although the sound was not too loud, it was irritating.
Wang Yue tried it out in the workshop. He could indeed make the gun barrel according to Liu Changsheng's foot.
However, his hands were very unstable. The lines in the barrel were messy. It was either fast or slow.
Wang Yue thought for a while and went to get a few pieces of white paper and a ruler. He began to write and draw on them.
Liu Changsheng was rushing to work, but he would also pay attention to Wang Yue from time to time.
At first, he was quite satisfied with Wang Yue's operation.
After all, Wang Yue's production process was all correct and there were no mistakes.
After practicing a dozen times, Wang Yue put it down and started to write and draw.
After drawing for more than an hour, Liu Changsheng was a little impatient. He put down his work and walked over.
"Little Wang, why aren't you practicing?”Liu Changsheng walked over and asked seriously.
"Master, take a look at this." When Liu Changsheng came over, Wang Yue had almost finished drawing.
He stopped what he was doing and handed the paper to Liu Changsheng.
"What is this?" Liu Sheng took a few glances but did not understand.
" This is the machine that I designed to pull the rifling. As long as the steel pipe is fixed here, the rotation speed here is equal to the speed of advancement here. It can be fast without hand stability..." Wang Yue explained the design drawing to Liu Changsheng in detail.
"Good, good, that's great." Liu Changsheng said excitedly.
This month's task was very heavy. There were more than 200 people in the second workshop. This month's production task was to produce 300,000 barrels.
Apprentices made up half of the fitter workers in the second fitter workshop.
There were less than a hundred people who could produce gun barrels.
It took Liu Changsheng five minutes to process a gun barrel.
As for the others, they were even slower.
After understanding the design.
Liu Changsheng couldn't control his excitement.
This thing was very simple. It was connected to the gears under the machine tool. There were only dozens of parts in total.
As long as his hand speed was fast enough, he could change the gun barrel quickly enough.
It was not a problem to fire a gun barrel in ten seconds.
Moreover, the technical work of pulling the rifling had become completely devoid of technical content.
All he needed to do was to place the gun barrel on it, fix it, and let the machine pull the rifling by itself.
"Old Li, Old Wu, Old Su, come here.”Liu Changsheng called out to the few Level Five fitter.
Then, they started discussing the design drawings fervently.
"That's quite an idea. This machine can be used directly as long as the steel is punched first.”
"Yes, hurry up. I estimate that you can pull out a rifling in 12 or 13 seconds.”
"It's too effortless."
"The mission is so heavy. What are you guys doing?”
This book is provided by FunNovel Novel Book | Fan Fiction Novel [Beautiful Free Novel Book]