He looked around the warehouse.
Wang Weiguo immediately asked a lot of questions.
"This machine has a large error in processing parts…Coaxiality problem. There was no problem with adjusting the nut…Then he needed to adjust the parallel degree of the bus bar and the guide rail on the side of the main shaft.”
"This one can't be started, and the circuit is fine. It must be a problem with the motor…Hmm, it should be the over-voltage that caused the burning of the voltage.”
“……”
There was a bonus from the Machinery Mastery skill.
Moreover, Wang Weiguo had turned this kind of old-fashioned lathes countless times. It was very easy to find out where the problem was.
However, the few experts from the factory who were called over behind the leader were shocked.
A few of the younger ones didn't take it seriously at first.
Especially Yi Zhonghai.
As the only grade-8 worker in the rolling mill, Yi Zhonghai was naturally qualified to participate in such an event.
In his heart, Wang Weiguo was a kid he had watched grow up.
He felt that Wang Weiguo was playing tricks.
He was waiting for an opportunity to expose her.
Earlier, Qin Huairu had looked for him. After the two of them had a secret discussion, Yi Zhonghai was planning to expose Wang Weiguo's tricks while the factory's leaders were around.
However, Wang Weiguo was able to find the problem with the machine in a very short time.
These people's eyes widened.
Was he still human?
Why was this person able to detect the malfunction of these machines just by looking at them?
If not for the fact that these people were all talents in this field.
They would definitely think that Wang Weiguo was bragging.
The factory leaders beside them did not understand mechanical problems, but they could understand people. When they saw the expressions of the mechanical experts behind them, they knew that it was done!
Wang Weiguo drank some wine at the dining table just now.
Wang Weiguo didn't have any intention of hiding his strength.
This wasn't something shameful. When these people asked around, Wang Weiguo had already explained that he was a Mechanic in the army.
This was not nonsense.
The system was just so awesome. The identity of the predecessor that it arranged for him was really true.
In the middle of the machinery warehouse.
One of them was more ostentatious than the other ordinary machine tools.
The plane was covered with a tarpaulin and placed in the center. There were no other machines around it, obviously afraid of bumping into it.
Wang Weiguo was also a little surprised.
"This is…a Dragon Gate Mill?"
He studied mechanics.
He knew that it was around this time that the country imported the Longmen Mill from Eastern Europe.
Compared to ordinary lathes, this was definitely a large machine, and it was considered the most cutting-edge mechanical equipment.
He didn't expect the Red Star Machinery Factory to have one.
Yet he was eating dust in the warehouse!
"Wang…Specialist Wang, you also know about the planer type milling machine. Have you done any research on it?”
Duan Weimin's voice trembled.
Obviously, Duan Weimin was shocked to see that Wang Weiguo knew Long Men Xi.
Wang Weiguo didn't make any guarantees and walked to the side of the Dragon Gate.
"Let me take a look first!"
As he spoke, he reached out and removed the oilcloth covering the mill.
"Sigh…"
Deputy Factory Manager Liu, who was in charge of the equipment, reached out his hand to stop him.
Wang Weiguo didn't stop at all.
He could only let go.
However…this is a Dragon Gate Mill, the only one in the country. Is it so useless in front of you? Everyone treasured it as much as the quantum computer of the future.
Usually, she wouldn't even bear to let anyone touch her.
From the perspective of future generations, this behavior was somewhat laughable.
However, thinking about it, even in the New Era, students still needed to wear foot gloves when entering the computer room. It was probably understandable why they did so.
Wang Weiguo was checking on the side while Duan Weimin explained the situation.
Already had a plan:
"It should be the wear and tear of the conical screw rod. This is also caused by the excessive strength of the machine. However, he still had to open it to see if it was the reason.”
Tear it down?
Wang Weiguo's words almost gave them a heart attack.
This was a machine imported from Eastern Europe!
The only one in the country!
It wasn't a matter of whether it was expensive or not. It was just that even if you had money, you wouldn't have anywhere to buy it.
Deputy Factory Manager Liu said,"
"That…Xiao Wang, we have all seen your ability. We believe in your ability as an expert consultant. As for the dismantling of the planer mill, let's wait.”
"We've already sent a telegram to the manufacturer. They'll send someone over in a month.”
A month?
Those guys are coming over!
Wang Weiguo was also speechless.
However, looking at the expressions of the people around him, he did not force it.
He only said with some regret,
"Actually, I have a way to disassemble the machine and reassemble it. I guarantee that no traces will be seen.”
"Within a month, the other party's maintenance personnel arrived.”
"The processing requirements of the conical screw rod are very high. They usually don't bring spare parts over. They check the problem and inform the factory to produce it and send it over for replacement.”
"Without three months, I don't think this Dragon Gate Mill can be used!”
The surrounding people fell silent.
They felt a little uncomfortable.
The feeling of being strangled by someone's neck was not good!
At this moment, a voice rang out,"
"I say, Wang Weiguo, this is the only planer mill in the country!”
"If you say there's a problem with the conical screw rod, then there's a problem with the conical screw rod? And even if it's the problem you mentioned, we don't have anyone here who knows how to process conical screw rods!”
Yi Zhonghai said.
He stood at the back of the crowd with an expression that advised the young man to ask for rat tail juice.
Yi Zhonghai's words.
The people around him didn't think anything was wrong.
If this conical screw was placed in the future, a four-axis numerical control machine tool would destroy it in minutes.
But now, it was a technical chasm.
If he wanted to make it, he would have to rely on a low-speed lathes or a hand-operated lathes to dig it out bit by bit.
It was a test of patience. The size needed to be measured repeatedly. The final smoothness could not be polished by the grinding wheel. It was all scraped out at a low speed by the metal blade that was hand-sharpened.
The number of people in the country who could manufacture conical screw rods could be counted on one hand.
Obviously, Yi Zhonghai was not among them.
Wang Weiguo sneered.
"Yi Zhonghai, your hand skills are passable, but in terms of mechanics, you're still lacking. If you don't understand, then listen carefully.”
"Besides, what's so difficult about a conical screw rod?”
"If you don't know how to do it, it can only mean that your skills are not up to par.”
Hiss…
The surrounding people were dumbfounded.
No matter what, Yi Zhonghai was the only level-eight worker in the factory.
Although Wang Weiguo didn't say a single swear word, it was even more embarrassing than cursing directly.
Could it be that Yi Zhonghai and Wang Weiguo had some kind of grudge?
The people here were a little confused.
Manager Yang knew the situation. When he heard Yi Zhonghai say this, he was a little unhappy.
Even though Wang Weiguo sounded like he was bragging.
However, if they could really solve the problem here, it would no longer be the glory of the factory.
Even in the Ministry, they had to put up posters to praise him!
Manager Yang turned to look at Wang Weiguo.
"Comrade Weiguo, are you sure you can open it and outsiders won't be able to tell?”
"Sure!"
"Good! Comrade Weiguo, I grant you the right to open and inspect this planer mill. If there are any problems or effects, I will take responsibility for you!”
The people beside him looked at each other and did not say anything.
Wang Weiguo did not delay.
He brought the toolbox over, but he did not start immediately. Instead, he asked the person next to him to bring a piece of rubber and put it in the socket of the wrench, between the screw and the wrench.
He unscrewed the screw on the cover.
The surrounding people looked at the screw that had been unscrewed, but they could not see any traces of it being unscrewed at all.
"There's such a thing?"
He looked at Wang Weiguo as if he was a noob looking at a god.
This book comes from：m.funovel.com。