Late at night, in the ultra-precision laboratory of Suzhou University.
The four PhD students walked towards the laboratory with tired faces.
He did not know what had happened.
The principal actually asked them to come to the laboratory in the middle of the night.
They had just pushed open the door of the laboratory.
In the brightly lit laboratory, the principal was carrying the materials used for his usual experiments with a serious expression.
The ground was littered with parts.
Judging from the scattered parts.
The principal even dismantled many of the experimental subjects that had already been prepared.
At this moment, they were stunned.
"This... This looks like my high-precision microscope!”
"This is my graduation thesis!”
"How did my photolithographic machine become like this?”
A few PhD students couldn't help but cry.
These were all their hard work, and now they had actually turned into a pile of components.
If he couldn't do it, he wouldn't be able to graduate.
More importantly, this was their blood, sweat, and tears!
"Stop whining and help me get things done. I'll give you research funds and buy better equipment! Go over and take a look at the modeling over there!”
Zhang Weiguo gritted his teeth and pointed at the computer not far away with a serious expression.
What exactly was this thing that could make the principal so generous?
He even promised to provide them with better equipment and manufacturing equipment after it was done!
This was simply unbelievable.
They quickly went to the computer.
When he saw the model above.
Their eyes widened.
"This! This is actually a photolithographic machine!"
They had never expected that they would be faced with the modeling of a photolithographic machine.
And from the modeling data, this was probably true.
Where did the principal get the model from?
If they were not mistaken, this should be the model of the 2mn ultra-precision photolithographic machine.
They were professionals in this field, so they knew the engraving machine very well.
At present, many countries were developing photolithographic machines, but the precision was only 5 nanometres.
This 2mn had completely subverted their imaginations.
No one in the world had ever developed a 2mn model.
But where did their principal get this modeling of the photolithographic machine from?
One had to know that their university did not have such a talent at all.
This was simply unbelievable.
If there was no problem with this modeling.
Then, the Dragon Country's technology in the area of engraving machines could directly reach the peak.
Now they finally understood why the principal called them to the laboratory at night.
This was something that could cause an international sensation.
If he could research it.
Don't even talk about tearing down their graduation thesis designs.
It would be fine even if he tore them apart.
For a moment, their eyes became extremely passionate.
"Don't just stand there. Hurry up and get the parts for me!”
When Zhang Weiguo saw the four people's intoxicated expressions, he could not help but curse.
Only now did the four of them react.
He was frantically searching for parts.
Although this was a high-precision laboratory.
However, that didn't mean that they had all kinds of equipment.
In order to gather the parts, they even pried open the locks of other laboratories.
He tore apart someone else's graduation project.
In any case, the principal would be there to help them.
It took more than an hour to gather all these parts.
With the parts and blueprints, everyone quickly manufactured the 2nm-precision photolithographic machine.
Everyone looked at the 2nm-precision photolithographic machine in front of them with burning eyes.
For them, who studied ultra-precision.
This photolithographic machine was simply their dream lover.
There was even one person who couldn't help but touch it.
If it weren't for the principal, they might never have seen this machine in their lives.
"Now, get ready to start the experiment!"
Zhang Weiguo said.
The four of them quickly started the machine.
Zhang Weiguo looked at the ultra-precision photolithographic machine and took a deep breath.
The next step would determine success or failure.
Zhang Weiguo carefully placed a piece of silica gel inside.
He looked at the crowd with a solemn expression.
"Let's begin!"
After the start.
The ultra-precision photolithographic machine began to carve according to the pre-made program.
To put it bluntly, this photolithographic machine was like a knife for carving vegetables.
However, he had become even more astute.
Using light to replace the blade.
Carving the required things on the light film covered by the rubber sheet.
Soon, the finished product appeared.
Zhang Weiguo didn't need to say anything.
Everyone quickly placed the chip into the machine and tested it.
The moment the experiment results were reported.
Everyone was extremely excited.
"Perfect! He actually managed to create a 2mn photolithographic machine!”
It was just a chip.
It was a huge step beyond many countries.
"Principal, you're really amazing! He was actually able to develop a 2mn photolithographic machine.”
"I didn't expect you to be so capable.”
"As expected of our principal! That's really awesome!"
A few PhD students looked at Zhang Weiguo excitedly.
Hearing this, the excitement on Zhang Weiguo's face gradually disappeared.
This was not his credit at all.
He was just a person who helped to make it.
The real inventor was Jiang Bai.
It was a patient who did not forget to study while lying on the hospital bed.
He was a scientist who sacrificed his life for scientific research.
" This isn't a model I created…"
After a long time, the silent Zhang Weiguo slowly opened his mouth.
No one expected that the one who invented this was not Zhang Weiguo.
" Then who is this?!"
The PhD students 'eyes were filled with curiosity.
This book comes from：m.funovel.com。