Yang Cheng.
Lin Chen's house was still very quiet.
It was as if what happened online had nothing to do with Lin Chen.
Li Xuewei came to look for Lin Chen after work.
However, Liu Baoqiang persuaded him to go back.
The excuse was simple: Lin Chen was busy.
After hearing this, Li Xuewei could only return home helplessly.
However, she was more curious about what Lin Chen was busy with every day.
She had also gotten someone to investigate Lin Chen's company during the day.
He did not expect that his good deskmate, whom he had not seen for a few years, would cause such a big commotion.
Initially, Li Xuewei thought that if Lin Chen's family's company couldn't hold on any longer.
Then, she would be able to help Lin Chen.
After all, the company she managed had more than a billion yuan in assets.
It was still possible to invest a little to save Lin Chen.
However, the news that she found out today was a bit of a blow to her.
"Hehe, Lin Chen has received an order worth more than 200 billion yuan. Why would he need the help of a small company worth more than a billion yuan?”
After hearing the news, Li Xuewei even said self-deprecatingly.
At this moment, Lin Chen, who was the hot topic on the internet, was doing the final installation of the industrial mother machine in the legacy space.
When the last component was installed.
"Haha, it's finally done!"
Lin Chen was a little excited.
He looked at the two-story-tall machine in front of him.
It was the result of his labor in the inheritance space for more than 20 days.
Lin Chen heaved a sigh of relief as he looked at the hill-sized machine in front of him.
Next, he needed to install the system and make some adjustments.
Furthermore, Lin Chen was very confident that there would be no problems with the industrial mother machine he had created.
Lin Chen didn't waste any time and immediately started to install the numerical control system.
Ten minutes later, the numerical control system was completely installed.
The industrial mother machine, which was performing a self-test, made a very small buzzing sound.
Lin Chen's face was filled with excitement.
Five minutes later, the control panel showed that the self-test was successful.
Now, he wanted to try processing it.
He just needed to input the data of the relevant parts and then place the materials in the processing position.
Lin Chen chose the most difficult and largest part of the photolithographic machine for trial processing.
The raw materials were available in the legacy space.
Soon, Lin Chen placed the raw materials on the industrial machine and set the processing parameters.
Lin Chen clicked on the start button.
He also began to feel nervous.
"Don't let any accidents happen!"
"Otherwise, all our efforts these days will be wasted!”
As the machine began to spin, the raw material looked like a piece of carved material.
Slowly, the prototype of the parts began to appear.
Lin Chen finally relaxed.
Lin Chen knew that he had succeeded this time.
The 10-axis industrial mother machine was officially launched.
Next, he would have to look at the specific processing accuracy!
Ten minutes later, the parts inside were finished.
Lin Chen quickly took the parts to the professional testing equipment for testing.
The conclusion made Lin Chen ecstatic. The processing precision had reached the pico-meter level.
It could be said to be a component, as long as the parameters were good.
The precision of the processing would be exactly the same as the set parameters.
It was one level higher than the most advanced nanotechnology in the world.
"Very good. This kind of processing precision can be said to be unmatched by anyone in the world!”
Lin Chen looked at the data displayed on the device and was very satisfied.
"However, the 10-axis industrial mother machine is still not enough.”
"We still need a lower level 9-axis 5-axis mass production machine tool.”
"At that time, not only can we fill the gap in the domestic high-end machine tools, but we can also export them abroad to break the blockade of high-end machine tools in Western countries.”
"Let some developing countries also have access to such high-precision machine tools.”
Thinking of this, Lin Chen continued to move.
Lin Chen designed two versions, one for domestic sales and one for export.
It was a simplified version for export.
However, even if it was a simplified version, it was still more precise than the most advanced foreign numerical control machine tools.
Lin Chen didn't spend much time designing these simplified blueprints.
It was done in less than two hours.
When the time came, these blueprints would be used by the machine tool factory to manufacture the five-axis simultaneous control machine tool.
Lin Chen felt that he only needed one 10-axis industrial machine for now.
After everything was ready, Lin Chen left the inheritance space.
It was only four in the morning outside.
Lin Chen, who hadn't really slept for the past few days, chose to lie on the bed and take a nap.
Lin Chen didn't get up until nine in the morning.
After washing up, she finished her breakfast.
Lin Chen headed to the office.
Today, he was going to the machine tool factory to take a look and release the industrial mother machine.
Yesterday, he had asked the machine tool factory to vacate a suitable place.
He even gave the machine tool factory a holiday today.
It was to facilitate today's operation.
Lin Chen arrived at the company and asked Long Bo to bring him to the machine tool factory.
Fortunately, they were all in Guangzhou. Otherwise, it would be a little troublesome.
"Young Master, you gave the machine tool factory a holiday? Why are you still going to the machine tool factory?"
In the car, Long Bo asked curiously.
Long Bo had been very confused about this yesterday.
However, he had left right after he had arranged everything, so he did not have the time to ask.
"Long Bo, I'm just going over to take a look. This is an important processing plant for us in the future, so we definitely have to go and take a look.”
Lin Chen said with a smile.
Of course, he definitely wouldn't tell the truth to Long Bo.
"But everyone is on vacation? What's there to see?" Long Bo still didn't understand.
"I'm just going over to see how the processing machine is like and see if there are any areas that can be optimized.”
"And I've already contacted a better machine tool. It can be delivered today.”
Lin Chen said with a smile.
"Really? That's great!" Long Bo was very happy.
He was curious about where Lin Chen got the machine.
However, he definitely wouldn't ask about this.
He knew that this must be Lin Chen's secret.
As the butler of the Lin family, he knew what he should and should not ask.
Lin Chen smiled and didn't say anything else.
An hour later, Lin Chen and the others arrived at the machine tool factory.
The signboard at the entrance of the factory had been changed to Stars Machine Tool Company.
When Lin Chen entered the machine tool factory, the factory manager was already waiting to welcome them.
"Hello, President Lin, Manager Long. I'm Zhou Guoqiang, the director of the machine tool factory. Welcome to the inspection.”
"Factory Manager Zhou, you're welcome. We're just here to take a look!”Lin Chen smiled.
Then, the factory manager brought Lin Chen and the others around the machine tool factory.
Then, Lin Chen found an opportunity to send them away.
He went to the workshop in the machine tool factory alone.
Lin Chen wanted to see if there was enough space.
After ensuring that there was enough space.
He contacted a truck driver whom he had already contacted before. He pulled a large foam bag that looked like a machine tool and wrapped it tightly before heading to the machine tool factory.
Lin Chen wanted to use this method to conceal the source of his items.
When they arrived, Lin Chen even asked Manager Zhou to find someone to use professional machinery to put the fake machine in the empty workshop.
After putting it away, Lin Chen sent everyone away again.
After everyone left, Lin Chen kept the foam machine into the legacy space.
Then, he released the real industrial mother machine from the legacy space.
Fortunately, the things released from the inheritance space did not cause much of a commotion.
He would follow Lin Chen's will and appear at the designated location.
Otherwise, the two-story-tall machine would cause a lot of noise.
At that time, it would definitely cause unnecessary trouble.
Lin Chen contacted Manager Zhou after releasing the industrial machine.
When Factory Manager Zhou arrived at the workshop and saw the huge thing inside, he was shocked.
He was completely stunned!
This book comes from：m.funovel.com。