When a new book was released, he begged for a 100-VIP broken egg.
Seeing Su Wen raise his hands, Chen Zheng and the others were puzzled.
Making an assault rifle with his own hands?
Was this a joke?
Making guns was not child's play!
Chen Zheng came back to his senses and looked at Su Wen."Comrade Su Wen, it's not advisable to advance rashly. Although our conditions are difficult, we have to develop step by step. We can't be too hasty, or else problems will arise.”
Su Wen looked at everyone's expressions and naturally knew that they did not believe him, so he said,"I know you don't believe me. I'll make it for you to see.”
"But I hope you can support me more.”
"Alright, if you want any machines or machine tools, you can tell me. I'll try my best to satisfy you!"”
Although Chen Zheng did not believe that Su Wen could wield an assault rifle, he still gave him some support.
He planned to let Su Wen give it a try as well as temper him.
After all, young comrades like Su Wen would never turn back until they hit a wall.
"Alright, thank you, Engineer Chen!"
After a simple chat, Su Wen went down to prepare the handcrafted spear.
After Su Wen left, the people from the Firearm Research Institute started discussing.
"Chen Gong, can this Comrade Su Wen really make an automatic rifle?”
"Impossible, absolutely impossible. Let alone using our hands, we can't even build a machine.”
"It's not easy to create it. Even copying it is very difficult!”
"Comrade Su Wen has just returned from the Bear Country and doesn't understand the production conditions of our Eighth Route Army's arsenal. It's normal for him to want to give it a try.”
"No matter what, it's good to let Comrade Su Wen give it a try. Let him know the difficulties and he will naturally retreat.”
.........
Everyone was discussing this.
Clearly, they did not believe that Su Wen could create an assault rifle with his bare hands. This was really a fantasy that was as difficult as ascending to the heavens.
Therefore, they continued to study bolt rifles.
On the other side, Su Wen immediately began to manufacture the AK47.
Because he had awakened his max level Comprehension talent, Su Wen's mind was now filled with the relevant principles and construction of the AK47.
The AK assault rifle was mainly composed of eight parts: barrel assembly, casing assembly, air guide system assembly, bolt assembly, firing assembly, stock, upper and lower guard wood and handle assembly, aiming device assembly, and magazine assembly.
Although Su Wen said that he was rubbing the gun with his bare hands, he still had to use the machine to polish the parts.
The most difficult part was the bolt assembly.
The AK-47 used a rotating double-protruding locking mechanism. The two protruding bamboo shoots on the gun head were different in size and position. They cooperated with the opening and locking slots in the gun frame to complete the opening and locking process.
Moreover, the AK-47 had a driving plane on the opening and locking slope of the bolt. This way, when the bolt frame drove the bolt into the chamber, there would be no " wedging " phenomenon. Even if there was dirt in the casing, it would not affect the action of the bolt into the chamber.
However, since the bolt needed to avoid this plane when opening and locking, there was a barrel joint sleeve at the bottom of the barrel. A pre-rotation inclined plane was processed on it, so that the bolt could be pre-rotated at an angle before opening and locking. Thus, the driving plane on the opening and locking tab of the bolt was staggered with the driving plane on the opening and locking inclined plane in the frame of the bolt. In this way, the bolt could be opened and locked smoothly.
Due to the above design, the opening and locking process of the AK-47 was very safe and reliable. The shape of the gun frame and the gun was relatively complicated, and the processing was relatively complicated.
However, it was already 1940. The arsenal of the Eighth Route Army was not completely poor. There were also some forging machines, stamping machines, machine tools, and so on.
Su Wen relied on these simple equipment to manufacture the AK-47's gun.
As it was not a professional equipment for manufacturing AK47 rifles, Su Wen still needed to use matte wheel to polish it to the required accuracy and scale after it was processed by the machine.
buzzing
Zi, Zi
At this moment.
In the courtyard, Su Wen was polishing one of the parts of the AK47 to open the lock.
Flames flew everywhere.
The machine roared.
Su Wen was working hard, constantly polishing every component.
According to Su Wen's plan, he would probably be able to manufacture the AK47 in a week or so.
This book is provided by FunNovel Novel Book | Fan Fiction Novel [Beautiful Free Novel Book]